10-29-2024
07:46 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
10-29-2024
07:46 AM
The first thing that comes to mind for this example is counting the quantity of edgeloops of the top face. If there are no overlapping holes, there should be one edgeloop for the contour of the plate and one edgeloop for each non-overlapping hole. So for a plate with five holes, the edgeloop count should be 6 (hole pattern quantity + 1).
As soon as you have less than 6 edgeloops, you have either overlapping holes, holes placed on the contour of the plate or holes located outside of the plate.