Adding a discipline after publish

[meg_apm]

I feel like this might be a silly question to ask, but is there a way to add to edit the discipline on a sheet? 

I can see notice at the bottom of the number of sheets with no discipline and the options to 'view the sheets without disciplines' or to 'view discipline settings', but if you can't fix it, I'm struggling to see the point in giving you the options. 

[andr3sant0s · Accepted solution]

Hi @meg_apm 

The disciple option is automatic according to the number of the sheet.

You can set the Designator (Letter before the number of the sheet) according to the standard that you are using.

A-101 will be set to Architectural

B-200 will be set to Geotechnical

.

.

.

If your sheet number doesn't have a Designator you won't have a discipline for that sheet.

https://help.autodesk.com/view/BUILD/ENG/?guid=Order_Sheets_With_Disciplines

I hoe it helps!

[meg_apm]

Thank you! It's making more sense now. All the examples I've seen so far used a 'perfect' version that appear to have had the discipline built into the sheet number when the sheet was drafted. All the ones I've been seeing come through have been '1 of 1' then were uploaded to ACC with a different number completely, so I was struggling to connect all the dots.

Bc I know I'll reference this in the future, the designator is edited within the sheet number space & goes in front of the sheet number, then ACC will automatically assign the discipline from there.