What if I want 2 AGVs not to overlap?

[kritsadakorn_k]

[ FlexSim 23.0.1 ]

route characteristics in the model is the same route with the running of all 3 AGV vehicles

What should I do if I want the AGV car to not run over each other? or there is a stop and wait for the car in front first.

(The route is a circular run.)

[moehlmann_fe · Accepted solution]

Set the type of the connection to Non-passing and set the Spacing value appropriately for the desired minimum distance between the task executers (in the network node properties, the connection type can also be changed by dragging the connection between the nodes again).

The non-passing connection is marked by a yellow arrow.

Additionally, if you don't want more than one task executer to occupy a network node at a time, set the Max Travelers to 1 and set the task executers to Do not travel offsets and block space on networks.

[kritsadakorn_k]

Thank you for replying to my question.

I've made an effort to repair it by using the advice in the answer. However, the issue is still present. Within the route, the car crosses over. What do I need to fix and where?

[moehlmann_fe]

Can you upload your model or at least some screenshots of the situation?

[kritsadakorn_k]

I can update the simulation model in this answer.

and image settings in the model

[moehlmann_fe]

In the screenshot it looks like they are travelling clockwise around the loop. That direction is still set to passing (green arrow).