Sorter Pallet

[erick_a4]

[ FlexSim 20.0.0 ]

Hi,

I need to create a distribution pallet conveyor, i have 4 transfers but the pallets always go to the transfer number 1, after of that any transfer does not works.

What i need to add in the simulation to control that flow.

This is the file:

cemix-simulation.fsm

Thanks

[braydn_t · Accepted solution]

@Erick A4

At least in the model you posted, there was no logic telling the conveyors to sort.

I would review the conveyor tutorials here: Conveyor Tutorials

Generally you need decision points connected by A port connections with logic in the Decision points to allow the conveyors to sort.