Navigation Error - Says that cannot find route

[sm_qwe2321]

[ FlexSim 23.2.2 ]

I was doing a warehouse model and using AGV but it seems like I am unable to find the path to Queue1, please kindly advice me on how to solve this issue, thank you! ImporvedModel + AGV.fsm

[joerg_vogel_HsH · Accepted solution]

Is there a control point connected by an “A“ type connection to your queue. Have you checked, if your direction path icons allows a travel to your control point. Are the path segments connected properly that each segment has got a three armed star.
If I build a model, I build it in a segments of small needed process instead of putting all together by dragging first all objects, then add all connections and so on. It is more important that a model runs than all objects are put in a workspace.

[sm_qwe2321]

1) Yup I have already placed an 'A' connection to my queue.

2) Yes, the directional path allows for said travel to the control point.

3) For this point I thought by just having two stars would be good enough?

Still does not work for me, even after trying out your pointers. Kindly advise me on next steps!

Thank you so much

[LCACoreSdnBhd]

Hi Logan, to troubleshoot where specifically your path is problematic, you can add a control point linked to Queue 1 and test sections of your path. I have located that the join path circled below is one of your problems, if the testing control point is placed after the joined path, the invalid path error appears, simply just delete and rejoin the path and it should work. You'll need to test all parts of your network as there seems to be another path error somewhere.

imporvedmodel-agv_2.fsm

[jason_lightfootVL7B4]

Two things to try:

1) Refresh Path links: Right click on a path and choose the following:

2) Check accessibility by right clicking and control point and selecting to show route accessibility when hovering over other control points:

These should help diagnose your issue.

[sm_qwe2321]

Thank you both for the guidance