Importing 3D models in full color

[jonathan_s3]

[ FlexSim 22.1.1 ]

When I import a 3D file from Solidworks (using stl or step) it makes the resulting shape a solid color.
What I'd like is to maintain all the colors I set in Solidworks. STL wont do this but STEP (AP203 or AP214) should retain that information.

Is there a way to do this?

[jason_lightfootVL7B4]

Jonathan do you have any other formats you can try exporting if those are not working? IGES, Collada, FBX? The STEP import route has been one of the least proven in my experience. Can you try importing to an intermediate tool like Blender/AC3D/3DSMax and then export to a different format? If you don't have access to any of those we may be able to try and find a good path if you are able to upload a sample part. (Make the post private if you need to)

[kavika_faleumu]

Hi @Jonathan,

We haven't heard back from you. Were you able to solve your problem? If so, please add and accept an answer to let others know the solution. Or please respond to the previous comment so that we can continue to help you.

If we don't hear back in the next 3 business days, we'll assume you were able to solve your problem and we'll close this case in our tracker. You can always comment back at any time to reopen your question, or you can contact your local FlexSim distributor for phone or email help.

[jonathan_s3 · Accepted solution]

It took a bit but I figured it out.

1. Ensure the Solidworks model units are set to millimeters and save.

2. Save the model as VRML, set the options to 1.0 or higher and the units to millimeters.

3. Import the model into Flexsim.

Assemblies do not import like this. Only a single, solid model.

[jason_lightfootVL7B4]

@Jonathan Thanks for the update.