I try to pull the luggage by the operator BUT I had simple problem! [IMPORTANT]

I try to pull the luggage by the operator BUT I had simple problem! [IMPORTANT]

noura_a3
Not applicable
11 Views
7 Replies
Message 1 of 8

I try to pull the luggage by the operator BUT I had simple problem! [IMPORTANT]

noura_a3
Not applicable

[ FlexSim 20.1.3 ]


Hello Everyone!

I hope you are doing well!


I try to simulate the boarding process in the airplane, and I successfully make the luggage pulled by the passenger as the real-life! but i have a problem when the passenger enters the aisle the luggage is break out of the seats 😞 As shown in the video below





How i enforce the luggage to be next to the passenger until he arrives at his seat, I mean I want the passenger even they enter the aisle they still pull their luggage!


Attached the model TCLS_BOARDING_FULL LOAD.fsm

0 Likes
Accepted solutions (1)
12 Views
7 Replies
Replies (7)
Message 2 of 8

Jacob_White
Community Manager
Community Manager
Accepted solution

Hi @Norah,

The link below goes over a similar problem regarding how to have operators pull an object behind them.

https://answers.flexsim.com/questions/117984/how-to-make-the-operator-pull-the-item-when-he-in.html?...

0 Likes
Message 3 of 8

noura_a3
Not applicable

Yes, I did it and it works very well when they walk in the waiting line or other location except for the aisle in the airplane, when they walk through the aisle, the baggage penetrates the chair and any other objects. So, how I fix the penetration that happened?




0 Likes
Message 4 of 8

Jacob_White
Community Manager
Community Manager
@Norah,

It seems that the model that you made a video of and the one you have shared with us are different. The model you shared only has the operators carrying the luggage normally. Without seeing the model with the problems we can only assume that the issue is with a set location trigger.

If you share the model with the error we can take a look at it and see how to solve your problem.

0 Likes
Message 5 of 8

noura_a3
Not applicable

I'm sorry, yeah it is a difference


Attached is the correct model

Boarding Process _Pull the luggage.fsm

0 Likes
Message 6 of 8

Jacob_White
Community Manager
Community Manager

@Norah,

To fix the location of the luggage you need to modify the on load trigger on your man and woman flowitem in the flowitem bin. For example I edited the X and Y values on the trigger to be 0 instead of 1 and the luggage is now being carried as shown in the picture below.

luggage-at-0-0-trigger.jpg

You just need to find an offset that makes the luggage look like it is being carried in the way that you want.

0 Likes
Message 7 of 8

noura_a3
Not applicable

Thank you, Jacob! Its work now 🙂

0 Likes
Message 8 of 8

Jacob_White
Community Manager
Community Manager
You're welcome!


0 Likes