I have Problems with Arrival Schedule in source

I have Problems with Arrival Schedule in source

alejandro_m16
Not applicable
43 Views
3 Replies
Message 1 of 4

I have Problems with Arrival Schedule in source

alejandro_m16
Not applicable

[ FlexSim 21.1.1 ]

Libro3.xlsxV12.05.12.2021.fsmGood afternoon. 
I want my arrivals to be every hour. 
How do i do it?
My problem is that when an hour passes the simulation stops. 


I need my pieces to arrive every hour at a time
0 Likes
Accepted solutions (1)
44 Views
3 Replies
Replies (3)
Message 2 of 4

eric_m3
Not applicable

Hi @Alejandro M16, it looks like you need to do a few things. Connect the first queue and the destination queues with A-connections so the boxes have somewhere to go. Also add an S-connection between the first queue and the robot. Then select the "use transport" box under the output section of the first queue so the robot will be the one to move the boxes.

0 Likes
Message 3 of 4

julio_r
Not applicable
Accepted solution

Hello Alejandro,

In your table you have the same arrival time for each arrival. To do this you need to put for your first arrival 3600, then 7200 and so, if you want to repeat that schedule idefently just check the check box on top of the arrival table that says "repeat table".

39443-asdf.png


0 Likes
Message 4 of 4

eric_m3
Not applicable

Hi @Alejandro M16, was Julio R's or my answer helpful? If so, please click the red "Accept" button at the bottom of one of our answers. Or if you still have questions, add a comment and we'll continue the conversation.

If we haven't heard back from you within 3 business days we'll auto-accept an answer, but you can always unaccept and comment back to reopen your question.

0 Likes