How to set the time table for working and rest

[owen_liaw_h]

[ FlexSim 22.0.1 ]

Helo, i have problem on the timetable. How to make with some condition:

1.it have 5 working days (120 hours with 8 hours warm-up)

2. After 5 days of work, the line is completely stopped for a weekend and in the next week a new warm-up is required.

3. Available work time is reduced by cleaning of machine (15 minutes per shift) and a rest pause for operator (15 min per shift) and is equal to 465 minutes per shift for processor and 450 min for operator

4. Hope u can use the date based

abc1.fsm

[joerg_vogel_HsH]

Use more time tables for different down states.

[jason_lightfootVL7B4]

You can change the down state for each stoppage in a single timetable.

[jason_lightfootVL7B4 · Accepted solution]

Timetables are for defining planned unavailability. I would put the operator shifts/ in one timetable and the machine schedule in another. Use the calendar based timetable and add the week's profile as repeating down events - repeating every 7 days where applicable, or for longer (e.g. quarterly) maintenance, add those as individual stoppages.

Attached is an example of how you might set up an operator and machine timetable.

abc1_jl.fsm

[chris_c8]

Jason, thank you and this makes sense to me, I will begin to work on this tonight.

I would offer you a reward however you received my only point, i'm sad.

Thanks

Chris

[ryan_c10]

Hi @Owen_liaw H, was Jason Lightfoot's answer helpful? If so, please click the "Accept" button at the bottom of their answer. Or if you still have questions, add a comment and we'll continue the conversation.

If we haven't heard back from you within 3 business days we'll auto-accept an answer, but you can always unaccept and comment back to reopen your question.

[owen_liaw_h]

ty for help, but i have the problem about the operator. For example, the operator shift is from 0800am to 0300pm, but he still work when the time is exceed 0300pm

[jason_lightfootVL7B4]

Can you post the model? I just showed how to represent the times and split it between machine and operators.