How is it possible to scale the charging time of an AGV?

[charmaine_r]

[ FlexSim 18.1.2 ]

With the AGV Process Flow it is only possible to tell by which percentage the AGVs need to load and when they resume. How can I tell how long the agvs charge during the simulation?

[SCHamoen · Accepted solution]

@Charmaine R

Look at the AGV network properties (right click on any object part of the AGV network or go to Toolbox -> AGV network). At the bottom you find the recharge speed:

[charmaine_r]

But to calculate the charging time with the Recharge-information I also need which capacity the agv is loading... the battery resume threshold only defines when the agv may resume, right? so i don't have the capacity is loading...

[joshua_s]

The battery capacity is on the same row

[charmaine_r]

sure! but i defined, with the battery resume threshold that the agv gets back to work when it has charged 80 percent. with more than one vehicle I don't know on which battery level the agv is, when it gets back to work.

[joshua_s]

You can read the current battery level using

AGV("The_AGV_In_Question).batteryLevel