adding a agv model gets stuck

[qoie200011]

[ FlexSim 22.2.0 ]

Hello,

I've attached my model. My problem is that at first I only have one agv and the model works fine. Then I add the second agv, the model turned out stuck. I expect that the second agv can also go to the queue carry the items. I checked the a-connect from the second agv to the path and also added the second agv to the agv process flow.model.fsm

Any help would be appreciated!

[moehlmann_fe · Accepted solution]

Your AGVs both have a capacity of 4. The AGV Process Flow template compares the number of pending transport tasks to this capacity and as a result only activates one of the two AGVs. The second one then blocks the active one, since it occupies one of the control points on the loop.

Either allow more than AGV to allocate the controls points or add parking points to the model that lie outside the main loop, so the AGVs can pass each other when one of them is inactive.

separate_parking.fsm

[natalie_white]

Hi @qoie200011, was Felix Möhlmann's answer helpful? If so, please click the "Accept" button at the bottom of their answer. Or if you still have questions, add a comment and we'll continue the conversation.

If we haven't heard back from you within 3 business days we'll auto-accept an answer, but you can always comment back to reopen your question.