Flame Forum
Welcome to Autodesk’s Flame Family (Flame, Flare, Flame Assist, Lustre) Forums. Share your knowledge, ask questions, and explore popular Flame topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

token <TAPE> using only the 1st 8* digits

1 REPLY 1
Reply
Message 1 of 2
maksro
228 Views, 1 Reply

token <TAPE> using only the 1st 8* digits

maksro
Community Visitor
Community Visitor

Very often I have to deal with ARRI Alexa footage.
I frequently use the sequence publish to process ARRI footage to dpx, exr.. whatever.
I have a workaround using EDL.. but I was wondering.... Is there a way to modify an existing token or create a new one to be able to export the only first eight digits of the tape name?

Eg: A001C001_220526_R2YU -->A001C001

best regards, 

max

flame 2022.3

0 Likes

token <TAPE> using only the 1st 8* digits

Very often I have to deal with ARRI Alexa footage.
I frequently use the sequence publish to process ARRI footage to dpx, exr.. whatever.
I have a workaround using EDL.. but I was wondering.... Is there a way to modify an existing token or create a new one to be able to export the only first eight digits of the tape name?

Eg: A001C001_220526_R2YU -->A001C001

best regards, 

max

flame 2022.3

Labels (1)
1 REPLY 1
Message 2 of 2
slabrie
in reply to: maksro

slabrie
Autodesk
Autodesk

Hello Max!

 

I would invite you to create an General Improvement on flame feedback for this need (https://feedback.autodesk.com/key/flame)

 

For now, you could do the following:

-Create a new Reel Group

-Duplicate the sequence you want to edit the tape names

-Open the sequence

-Go to Conform

-Select all your events

-Edit the Tapename

-Export the sequence

 

Which application will you send the EDL to?  I am curious since I would have expected that all editorial & finishing products in 2022 support longer than 8 characters tape name.  Digital acquisition introducesd ten years ago pushed everybody to extend tape name length.

Stéphane Labrie
Senior Product Owner
Flame Family
0 Likes

Hello Max!

 

I would invite you to create an General Improvement on flame feedback for this need (https://feedback.autodesk.com/key/flame)

 

For now, you could do the following:

-Create a new Reel Group

-Duplicate the sequence you want to edit the tape names

-Open the sequence

-Go to Conform

-Select all your events

-Edit the Tapename

-Export the sequence

 

Which application will you send the EDL to?  I am curious since I would have expected that all editorial & finishing products in 2022 support longer than 8 characters tape name.  Digital acquisition introducesd ten years ago pushed everybody to extend tape name length.

Stéphane Labrie
Senior Product Owner
Flame Family

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report