Community
FeatureCAM Forum
Welcome to Autodesk’s FeatureCAM Forums. Share your knowledge, ask questions, and explore popular FeatureCAM topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Milling cutter moves through part in simulation but toolpath points seem ok

0 REPLIES 0
Reply
Message 1 of 1
puetz5WCNX
95 Views, 0 Replies

Milling cutter moves through part in simulation but toolpath points seem ok

Hello, I have a problem with the simulation of a toolpath feature created by an add-in. The toolpath points all seem to have been created correctly (X, Y, Z, I, J and K are correct when the problem occours), but in the simulation the position of the workpiece is suddenly changed at one point, causing the cutter to pass through the workpiece. Five axes are used and instead of rotating the workpiece, it is repositioned around the cutter and then milled correctly. Does anyone have any idea what the problem could be?

Labels (1)
0 REPLIES 0

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report