Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

featurecam swiss

engenharia
Participant

featurecam swiss

engenharia
Participant
Participant

Hello guys.

I Have other problem with featurecam swiss, after cutoff my part disapear and not stay in collet of sub-spindle.

Wy? 

Sem título.png

0 Me gusta
Responder
Soluciones aceptadas (1)
828 Vistas
7 Respuestas
Respuestas (7)

Anonymous
No aplicable

Hi @engenharia,

 

It strange, it also happens with me.

 

Anonymous
No aplicable

what kind of swiss machine?

0 Me gusta

abhishek.juvekar
Alumni
Alumni

Hi @engenharia,

 

Thanks for posting on Autodesk Forum.

 

Can you please supply the post and machine to verify the above behavior at my end?

 

Thank You.



Abhishek
0 Me gusta

engenharia
Participant
Participant

Hello, my machine is Citizen L20-9.

Thanks.

0 Me gusta

engenharia
Participant
Participant

Okay, follow the files.

https://drive.google.com/open?id=1iH-pZD50lfh1b_DIZ36Gv9hj_4f2yrPq

My pos processor and my md file are old and do not work correctly on my machine, a Citizen L20-9, but the autodesk representative in Brazil has these files for Citizen L20.
Thank you.

0 Me gusta

brian.donahue
Autodesk
Autodesk
Solución aceptada

Seems that featurecam is considering it as a "chip" and removes it from the simulation, since it's volume is small relative to the rest of the stock size.  that seems like a bug almost.  luckily there's a setting you can control and workaround this - In options -> simulation -> round stock there is the "Chip size" .   Set this to 1% (defaults to 2), and the "subspindle piece" will stay in the sim.

2018-07-31 08_27_04-FeatureCAM Options.png



Brian Donahue
Product Owner FeatureCAM

engenharia
Participant
Participant

Brian, thank you so much, you solved my problem.

0 Me gusta