Would it be possible to add functionality to automate the creation of asset tags. For example if I have a sequence of items, like a conveyor line, I would like to add asset tags to each one and apply serial numbers. However, it is quite cumbersome to have to add asset tags to each one. It would be great if I could select on an item, say a component "Base:1" and then apply asset tags to each member of the family (Base:2, Base:3, etc.).
My initial thoughts would be to create a special workpoint / connector, to attach the asset tag, on each published asset. Then the command could be launched and a prefix could be assigned (maybe have the project number first, then the serial number) and Inventor would then go through each occurrence of the part and apply the next asset tag to it. If you have any questions, please do not hesitate to contact me. Hope all is well and have a most blessed night!
My task is to create a model of crushing and screening plant. Unfortunately, the existing action types of the processor does not allow to simulate the operation of classification. I must have that type of action, in which sum of the output quantities is equal to the sum of the input quantities.
For example, at the input 7, at the output 5 and 2.
Or at the input 1, at the output 0.1 and 0.9.
Possibility to use fractional quantities for this task is not necessary, but desirable.