How setup camduct to work with ductboard

dimitry.shan
Contributor

How setup camduct to work with ductboard

dimitry.shan
Contributor
Contributor
‎08-10-2022 07:14 PM

hello all,  i have a machine wiht three tools, one is knife, angles double knife and a marker / pen. I having trouble outputting NC file with tool numbers for each. Any one knows how to set it up? i was trying to use AXYZ postprocessor.

 

the older working NC file: but what i am getting does not have the M06 T1 or tool 2 commands in it.

"

G90 G91.1 G21 G40 G17
M6 T1
G0 Z20
G0 X0.000000 Y367.500000
G0 Z20.000000
G0 X0.000000 Y408.500000 Z20.000000 C0.000000
G1 X0.000000 Y367.500000 Z-21.000000
G1 X202.462113 Y367.500000 Z-21.000000 F20000.000000
G1 X202.462113 Y408.500000 Z20.000000
G0 X192.518152 Y407.275843 Z20.000000 C14.036243
G1 X202.462113 Y367.500000 Z-21.000000
G1 X402.462113 Y417.500000 Z-21.000000 F20000.000000
G1 X392.518152 Y457.275843 Z20.000000
G0 X402.462113 Y458.500000 Z20.000000 C0.000000
G1 X402.462113 Y417.500000 Z-21.000000
G1 X600.000000 Y417.500000 Z-21.000000 F20000.000000
G1 X600.000000 Y458.500000 Z20.000000
G0 X600.000000 Y376.500000 Z20.000000 C180.000000
G1 X600.000000 Y417.500000 Z-21.000000
G1 X402.462113 Y417.500000 Z-21.000000 F20000.000000
G1 X402.462113 Y376.500000 Z20.000000
G0 X412.406074 Y377.724157 Z20.000000 C194.036243
G1 X402.462113 Y417.500000 Z-21.000000
G1 X202.462113 Y367.500000 Z-21.000000 F20000.000000
G1 X212.406074 Y327.724157 Z20.000000
G0 X202.462113 Y326.500000 Z20.000000 C180.000000
G1 X202.462113 Y367.500000 Z-21.000000
G1 X0.000000 Y367.500000 Z-21.000000 F20000.000000
G1 X-0.000000 Y326.500000 Z20.000000
G0 Z20.000000
G0 X611.079506 Y299.000000 Z20.000000 C180.000000
G1 X611.079506 Y340.000000 Z-21.000000
G1 X0.000000 Y340.000000 Z-21.000000 F20000.000000
G1 X-0.000000 Y299.000000 Z20.000000
G0 X0.000000 Y381.000000 Z20.000000 C0.000000
G1 X0.000000 Y340.000000 Z-21.000000
G1 X611.079506 Y340.000000 Z-21.000000 F20000.000000
G1 X611.079506 Y381.000000 Z20.000000
G0 Z20.000000
G0 X1.250000 Y884.750000 Z20.000000 C0.000000
G1 X1.250000 Y843.750000 Z-21.000000
G1 X198.787887 Y843.750000 Z-21.000000 F20000.000000
G1 X198.787887 Y884.750000 Z20.000000
G0 X208.731848 Y883.525843 Z20.000000 C-14.036243
G1 X198.787887 Y843.750000 Z-21.000000
G1 X398.787887 Y793.750000 Z-21.000000 F20000.000000
G1 X408.731848 Y833.525843 Z20.000000
G0 X398.787887 Y834.750000 Z20.000000 C0.000000
G1 X398.787887 Y793.750000 Z-21.000000
G1 X601.250000 Y793.750000 Z-21.000000 F20000.000000
G1 X601.250000 Y834.750000 Z20.000000
G0 X601.250000 Y752.750000 Z20.000000 C180.000000
G1 X601.250000 Y793.750000 Z-21.000000
G1 X398.787887 Y793.750000 Z-21.000000 F20000.000000
G1 X398.787887 Y752.750000 Z20.000000
G0 X388.843926 Y753.974157 Z20.000000 C165.963757
G1 X398.787887 Y793.750000 Z-21.000000
G1 X198.787887 Y843.750000 Z-21.000000 F20000.000000
G1 X188.843926 Y803.974157 Z20.000000
G0 X198.787887 Y802.750000 Z20.000000 C180.000000
G1 X198.787887 Y843.750000 Z-21.000000
G1 X1.250000 Y843.750000 Z-21.000000 F20000.000000
G1 X1.250000 Y802.750000 Z20.000000
G0 Z20.000000
G0 X600.000000 Y716.500000 Z20.000000 C180.000000
G1 X600.000000 Y757.500000 Z-21.000000
G1 X402.462113 Y757.500000 Z-21.000000 F20000.000000
G1 X402.462113 Y716.500000 Z20.000000
G0 X392.518152 Y717.724157 Z20.000000 C165.963757
G1 X402.462113 Y757.500000 Z-21.000000
G1 X202.462113 Y807.500000 Z-21.000000 F20000.000000
G1 X192.518152 Y767.724157 Z20.000000
G0 X202.462113 Y766.500000 Z20.000000 C180.000000
G1 X202.462113 Y807.500000 Z-21.000000
G1 X0.000000 Y807.500000 Z-21.000000 F20000.000000
G1 X-0.000000 Y766.500000 Z20.000000
G0 X0.000000 Y848.500000 Z20.000000 C0.000000
G1 X0.000000 Y807.500000 Z-21.000000
G1 X202.462113 Y807.500000 Z-21.000000 F20000.000000
G1 X202.462113 Y848.500000 Z20.000000
G0 X212.406074 Y847.275843 Z20.000000 C-14.036243
G1 X202.462113 Y807.500000 Z-21.000000
G1 X402.462113 Y757.500000 Z-21.000000 F20000.000000
G1 X412.406074 Y797.275843 Z20.000000
G0 X402.462113 Y798.500000 Z20.000000 C0.000000
G1 X402.462113 Y757.500000 Z-21.000000
G1 X600.000000 Y757.500000 Z-21.000000 F20000.000000
G1 X600.000000 Y798.500000 Z20.000000
G0 Z20.000000
G0 X601.250000 Y1192.750000 Z20.000000 C180.000000
G1 X601.250000 Y1233.750000 Z-21.000000
G1 X398.787887 Y1233.750000 Z-21.000000 F20000.000000
G1 X398.787887 Y1192.750000 Z20.000000
G0 X408.731848 Y1193.974157 Z20.000000 C194.036243
G1 X398.787887 Y1233.750000 Z-21.000000
G1 X198.787887 Y1183.750000 Z-21.000000 F20000.000000
G1 X208.731848 Y1143.974157 Z20.000000
G0 X198.787887 Y1142.750000 Z20.000000 C180.000000
G1 X198.787887 Y1183.750000 Z-21.000000
G1 X1.250000 Y1183.750000 Z-21.000000 F20000.000000
G1 X1.250000 Y1142.750000 Z20.000000
G0 X1.250000 Y1224.750000 Z20.000000 C0.000000
G1 X1.250000 Y1183.750000 Z-21.000000
G1 X198.787887 Y1183.750000 Z-21.000000 F20000.000000
G1 X198.787887 Y1224.750000 Z20.000000
G0 X188.843926 Y1223.525843 Z20.000000 C14.036243
G1 X198.787887 Y1183.750000 Z-21.000000
G1 X398.787887 Y1233.750000 Z-21.000000 F20000.000000
G1 X388.843926 Y1273.525843 Z20.000000
G0 X398.787887 Y1274.750000 Z20.000000 C0.000000
G1 X398.787887 Y1233.750000 Z-21.000000
G1 X601.250000 Y1233.750000 Z-21.000000 F20000.000000
G1 X601.250000 Y1274.750000 Z20.000000
G0 Z20.000000
G0 X586.500000 Y622.670494 Z20.000000 C90.000000
G1 X627.500000 Y622.670494 Z-21.000000
G1 X627.500000 Y1233.750000 Z-21.000000 F20000.000000
G1 X586.500000 Y1233.750000 Z20.000000
G0 X668.500000 Y1233.750000 Z20.000000 C-90.000000
G1 X627.500000 Y1233.750000 Z-21.000000
G1 X627.500000 Y622.670494 Z-21.000000 F20000.000000
G1 X668.500000 Y622.670494 Z20.000000
G0 Z20.000000
G0 X926.500000 Y622.670494 Z20.000000 C90.000000
G1 X967.500000 Y622.670494 Z-21.000000
G1 X967.500000 Y1233.750000 Z-21.000000 F20000.000000
G1 X926.500000 Y1233.750000 Z20.000000
G0 X1008.500000 Y1233.750000 Z20.000000 C-90.000000
G1 X967.500000 Y1233.750000 Z-21.000000
G1 X967.500000 Y622.670494 Z-21.000000 F20000.000000
G1 X1008.500000 Y622.670494 Z20.000000
G0 Z20.000000
G0 X0.000000 Y41.000000 Z20.000000 C0.000000
G1 X0.000000 Y0.000000 Z-21.000000
G1 X611.079506 Y0.000000 Z-21.000000 F20000.000000
G1 X611.079506 Y41.000000 Z20.000000
G0 X611.079506 Y-41.000000 Z20.000000 C180.000000
G1 X611.079506 Y0.000000 Z-21.000000
G1 X0.000000 Y0.000000 Z-21.000000 F20000.000000
G1 X-0.000000 Y-41.000000 Z20.000000
G0 Z20.000000
M6 T2
G0 Z20
G0 X0.000000 Y367.500000
G0 Z-21.000000
G1 X0.000000 Y807.500000 F20000.000000
G0 Z20.000000
G0 X1.250000 Y843.750000
G0 Z-21.000000
G1 X1.250000 Y1183.750000 F20000.000000
G0 Z20.000000
G0 X601.250000 Y1233.750000
G0 Z-21.000000
G1 X601.250000 Y793.750000 F20000.000000
G0 Z20.000000
G0 X600.000000 Y757.500000
G0 Z-21.000000
G1 X600.000000 Y417.500000 F20000.000000
G0 Z20.000000
G0 X611.079506 Y340.000000
G0 Z-21.000000
G1 X611.079506 Y0.000000 F20000.000000
G0 Z20.000000
G0 X627.500000 Y622.670494
G0 Z-21.000000
G1 X967.500000 Y622.670494 F20000.000000
G0 Z20.000000
G0 X967.500000 Y1233.750000
G0 Z-21.000000
G1 X627.500000 Y1233.750000 F20000.000000
G0 Z20.000000
G0 X0.000000 Y0.000000
G0 Z-21.000000
G1 X0.000000 Y340.000000 F20000.000000
G0 Z20.000000
M02

 

 

"

 

Report
0 Likes
Reply
Report
654 Views
5 Replies
Replies (5)

LanceTSM
Advocate
Advocate
‎08-18-2022 08:05 PM

There are some support documents that will help you with this, and incidently they reference the AXYZ postprocessor.

Start with this link:

https://knowledge.autodesk.com/support/fabrication-products/learn-explore/caas/CloudHelp/cloudhelp/E...

 

Report

dimitry.shan
Contributor
Contributor
in reply to LanceTSM
‎10-26-2022 08:10 AM

hello sorry for such a late reply, the real issue i am facing is the layers in the DXF output file. Please see the attached image showing the green and blue lines, the green are to be cut with one tool and the blue with another. BUT the DXF file exported is plain and without layers. Am i missing some settings?

Preview file
9 KB
Report
0 Likes

LanceTSM
Advocate
Advocate
‎11-06-2022 06:35 PM

You need to setup the DXF Output Layer Mapping to map CAMducts layers to the dxf file layers.

This is done in CAMduct via "Database - Manufacturing - Tool Defaults - Layer Mapping - Export"

See attached screen shots

Preview file
36 KB
Preview file
792 KB
Preview file
783 KB
Report
0 Likes

LanceTSM
Advocate
Advocate
‎11-06-2022 09:05 PM

A follow up question if I may?

You originally said you were using AXYZ postprocessor, why have you now changed to using dxfs?

If your machine supports the AXYZ postprocessor it will be more efficient to directly generate G-Code from CAMduct,

as you can control your speeds, cut direction and cut order etc. within CAMduct and output to the machine.

You just need to get your Tool assignments set-up correctly.

Report
0 Likes

dimitry.shan
Contributor
Contributor
‎11-08-2022 12:04 AM

The cnc machine controller accepts DXF files and generated its own G-Code, this is where i made a mistake, however it only accepts DXF files with layers for different tool.

Report
Report a website issue