FABRICATION CAMDUCT 2015 ITEM FOLDER NO ANNOTATION

[Anonymous]

Recentlt my camduct 2015 item take-offs has no annotations. All database settings appear to be set correctly. (database/fitting/pattern switches/views)

All selections are checked.

MAJ. files created using FABRICATION CADMEP 2015 are annotated.

Any one have a solution for this problem?

[davedykes]

Hi Jojacomo

It could be that the "Annotate" setting has been turned off in the Views.

I have uploaded a Video that you can wahtch at this link: http://autode.sk/1xxNGFF that explains where and what you should look for.

If this resolves the issue please click the "Accept as Solution" button on the borrom Right so I know this has been resolved.

[Anonymous]

Dave,

Have view video, annotation is visible when editing but not when doing a take-off.

See attached zip file.

Also, yesterday did take-off of a CID 1. After entering a size of 31" X 16" by 4" long, machine built a duct 33" X 18" by 4" long. Today take-off seems to be correct.

Joe Jacomo
Design Manager
Lemoine Marine Refrigeration, Inc
Harvey, LA 70058
503-366-0903

[davedykes]

Hi Joe

There is no attachment on the post, can you try uploading it again.

[Anonymous]

See attached.

Joe Jacomo
Design Manager
Lemoine Marine Refrigeration, Inc
Harvey, LA 70058
503-366-0903

[davedykes · Accepted solution]

Hi Joe

I got the files now thanks.

It took me a while to figure out what was going on, but I think I got to the bottom of it.  I have made a short Screencast that explains what I found and how to fix it.

You can view it here:

http://autode.sk/1ChjLXR

Hope this works for you as well.

[Anonymous]

That worked.

Thanks for the help.

Joe Jacomo
Design Manager
Lemoine Marine Refrigeration, Inc
Harvey, LA 70058
503-366-0903