Solved: Re: Cutting speed in camduct

Anonymous · ‎03-14-2019

Hello,

Does anyone have a list of recommended cutting speeds,kerf widths etc. for mild steel 3mm to 150mm+ thickness?

Your help will be very much appreciated.

Andy

nathan.chapman · ‎03-15-2019

Andy-

These would be machine specific. I could give you our numbers but probably wouldn't be the best for your machine. What type of machine is it? Plasma, waterjet.

Regards,

Nate

Nathan Chapman
Production Manager at General Heating and Air Conditioning

Revit Architecture Certified Professional
Revit MEP Mechanical Certified Professional
Revit MEP Electrical Certified Professional
DynaFabrication Package Author

Was this answer helpful? If so, please click the ACCEPT AS SOLUTION or the KUDOS button.

Anonymous · ‎03-18-2019

The machines we use are Messer and Esab plasma.

If you could give me a guide, that would help out a lot.

Thanks

nathan.chapman · ‎03-18-2019

Are you looking for a guide on how to setup the machine in CAMduct? Or general speed per gauge?

Nathan Chapman
Production Manager at General Heating and Air Conditioning

Revit Architecture Certified Professional
Revit MEP Mechanical Certified Professional
Revit MEP Electrical Certified Professional
DynaFabrication Package Author

Was this answer helpful? If so, please click the ACCEPT AS SOLUTION or the KUDOS button.

Anonymous · ‎03-19-2019

Hi Nathan,

Just a general speed per gauge.

Andy

nathan.chapman · ‎04-10-2019

Sorry it took so long to get back to you. Been really busy at work. See attached document.

Nathan Chapman
Production Manager at General Heating and Air Conditioning

Revit Architecture Certified Professional
Revit MEP Mechanical Certified Professional
Revit MEP Electrical Certified Professional
DynaFabrication Package Author

Was this answer helpful? If so, please click the ACCEPT AS SOLUTION or the KUDOS button.

Anonymous · ‎04-10-2019

Thanks Nathan,

Kind regardss

Andy