Creating a new Oval Part for Fabrication MEP to also use in Revit

Anonymous

Creating a new Oval Part for Fabrication MEP to also use in Revit

Anonymous
Not applicable
‎04-08-2019 08:08 AM

I am using a Main Round duct that i need to tap an oval duct into.  Is there a CID for a shoe or conical saddle for oval into round duct?  Is it possible to get you all to create a block for that if there is a CID for it?  Also what about adding a manual damper on the ovals?  Is there a way to add that all to be used in Revit?  This is all in Fabrication MEP and Revit 2018.

Report
0 Likes
Reply
Report
Accepted solutions (1)
Solution 1
608 Views
1 Reply
Reply (1)

nathan.chapman
Collaborator
Collaborator
‎04-10-2019 09:35 AM
Accepted solution

Use CID 118.  There is lists of the different CID patterns and what it allows for options.  I would recommend looking those up.

Nathan Chapman
Production Manager at General Heating and Air Conditioning

Revit Architecture Certified Professional
Revit MEP Mechanical Certified Professional
Revit MEP Electrical Certified Professional
DynaFabrication Package Author

Was this answer helpful? If so, please click the ACCEPT AS SOLUTION or the KUDOS button.
Report
0 Likes
Report a website issue