T092 package outline on manufacture image

[infinite.machinery]

The voltage regulator in a T092 package has this appearance on the board layout

Yet when I look at the same device in the Eagle manufacture view is looks like this, with a gap in the device outline.

I'm also seeing this gap in an earlier board I had manufactured using this same footprint. 

What is the cause of this and can it be prevented?

[Yura.Ivanov.VLuki]

You see in the picture the layers Place and Docu (and they are the same color) - the line is solid.

Only the Place layer is used for production - where Docu is drawn - the break is obtained.

You can change layer colors to see differences.

You can edit the TO92.PAC to eliminate the break.

[one-of-the-robs]

That's all very well, @Yura.Ivanov.VLuki , but the gap that @infinite.machinery is referring to is not one of the places where the footprint (correctly) uses tDoc to avoid a pad. It's off on the side, where a pad would be on the other TO92 variant footprints but isn't on the straight line version in question. Neither the library I just checked here nor the one you used in your example have that gap.

Scratch that - I've just re-read and noticed that he's referring to a voltage regulator. It turns out the V-reg library has a bug here in that it uses the same silk screen for TO92L as for TO92A, when it should have a small difference, just as the transistor libraries do.

[Yura.Ivanov.VLuki]

Автор не указывает какое устройство из какой библиотеки использует, поэтому так я предположил, что использовано своё устройство (смотрите обозначения площадок), например (ref-packages.lbr / TO92)

[Yura.Ivanov.VLuki]

The author does not specify which device from which library is used, so I assumed that my device was used (see site designations), for example (ref-packages.lbr/TO92).

Sorry for my bad English

[infinite.machinery]

The device is one that I created myself for the 78L05 (and 79L05). I used a T092 footprint from another library. From the replies to this thread I suspected that there was a problem with the how the lines in the footprint were assigned to layers, in particular the arc at the top of the device.

I opened the footprint and sure enough the arc at the top was on tDocu. I changed it to tPlace and now the outline in the manufacture view looks correct.

Thanks everyone for all your help!