Hi. I have recently made a new design block with the minimal configuration of an ATMEGA328P MCU.
My design includes both schematic and board files. I have designators in the design block such as R1, R2, C1, C2, and so on.
When I try to import the dbl to a new created schematic, all the component names are changed: if i had R1, R2 and R3, now R1 becomes R4, R2 becomes R5 and R3 becomes R6. This happens in all my components despite i don't have any other components in my schematic neither in my board.
The steps i'm following are these:
1. Open EAGLE, then File > New Project.
2. Right clic in New_Project > New > Schematic.
3. Generate board from schematic.
4. Go back to schematic and select the option "Add a Design Block".
5. I select my design block from the default folder.
6. I place both schematic and board designs into my project, then I accept the Paste from file window.
7. Now i have all the names of my components shifted as I described above.
I would appreciate your help with this issue.
Design block schematic screenshot
Design block board screenshot
Project shematic screenshot (notice how all the designators has changed)
Project board screenshot
