making vias on the path pattern

making vias on the path pattern

Anonymous
Not applicable
611 Views
1 Reply
Message 1 of 2

making vias on the path pattern

Anonymous
Not applicable

Hi, 

 

I want to ask about patterning on the path.

I think before few days ago, I saw a post in this Forum about patterning on the path.

(I think that post was about drawing Mouse-bites pattern for making breakaway Tab)

this was first drawing one single path using line or arc command, then placing vias on that path.

I can not find that post now..

maybe like below

Capture.JPG

 

 

Anyone knows about this.

please let me know how to do this.

 

Thanks

0 Likes
Accepted solutions (1)
612 Views
1 Reply
Reply (1)
Message 2 of 2

jorge_garcia
Autodesk
Autodesk
Accepted solution
Hi @Anonymous,

I hope you're doing well. You can use the drillline-array ulp that can be found on our website.

http://eagle.autodesk.com/eagle/ulp?utf8=%E2%9C%93&q%5Btitle_or_author_or_description_cont%5D=drill_line&button=

Let me know if there's anything else I can do for you.

Best Regards,


Jorge Garcia
​Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.