Link between local eagle schematic and layout design to fusion 360 schematic and layout

[dkaman]

I am in the process of migrating my design efforts from Eagle to Fusion 360. If I am in the middle of an Eagle design but want to use a Fusion feature (such as push to 3D pcb) and I load the current Eagle schematic and layout files to Fusion (and create the Fusion project) but decide to make a change in the layout, for example, using Fusion, will that change show up in the Eagle layout file? Will a change I make in the Eagle design files show up on the Fusion design? I'm logged in to both Eagle and Fusion while a change is made.

Using latest versions of Eagle and Fusion.

[jorge_garcia · Accepted solution]

Hi @dkaman,

I hope you're doing well. Fusion 360 and EAGLE won't track each other live. Changes you make in one will not track to the other. You should really try to be in or the other.

I understand that you are in the middle of a design right now and that is literally the WORST time to change programs. So I would say get as far as you can in your design in EAGLE and then upload it to Fusion to use whatever 3D features you need.

Let me know if there's anything else I can do for you.

Best Regards,

[dkaman]

Yes, just an awkward time but that's life!  Thanks for the quick response also!