Rotating breaks my block apart.

[ByronU78KM]

As you can see,

 

 

 

I created a Metal Building Roof Dynamic Section For some reason when I rotate it, it breaks apart as you can see in My snips.  I have attached my block, if someone can tell me why this is happening. - Thanks Byron

[j.palmeL29YX]

If you delete the Move action the adressed problem goes away. But because I do not yet full understand the expected behavior of the block I can not submit a suggestion how to get the wished functionality. 

[ByronU78KM]

I need the Move action because I change my roof width and pitch to fit building by extending the array function and it keeps the end section at the end next to ridge. Thanks Byron

[libbybapa · Accepted solution]

If you remove the chained property of the Distance 1 parameter, the rotation works fine.  There don't seem to be any actions that act on the Distance 1 parameter other than the rotate action which does not affect the linear distance so the array action is unaffected, but the rotate activates the move action in an unwanted manner.  I do not see any reason why you would have made the linear parameter chained.  With it un-chained, the unwanted move action is eliminated and the array action is unaffected.  Seems like a simple fix.

[ByronU78KM]

Thank you, I have attached my sections I am developing for clarity of what I am trying to accomplish. I do not understand removing the move parameter on distance 1. How can I keep moving the last section to stay on the end.

[j.palmeL29YX]

You did not yet "remove the chained property of the Distance 1 parameter" as suggested by @libbybapa .