Community
Dynamic Blocks Forum
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Help with array & stretch

1 REPLY 1
Reply
Message 1 of 2
marymAGTL5
85 Views, 1 Reply

Help with array & stretch

I can get the stone to array just fine but when I add in the stretch for the line behind it, the line always stretches too far. 

I don't want to have a line behind each stone section in case people explode it and then there's all these little lines. a single line is what I'm trying to achieve. 

Any help on why the line wont end at the same point as the stone is greatly appreciated. 

1 REPLY 1
Message 2 of 2
Libbya
in reply to: marymAGTL5

If you don't want the line to stretch beyond the stone then add an increment to the Distance1 parameter with the increment equal to the column offset of the array.  

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

AutoCAD Inside the Factory


Autodesk Design & Make Report