Hi Guys,
I have just noticed these odd Ghosts shapes in Pattern preview. Check out the screencast:
Cheers / Ben
---------------------------------------------------------------------------------------------------------------------------
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.
Check out my YouTube channel: Fusion 360: Newbies+
Ben Korez
Owner, TESREG.com & Fusion 360 NewbiesPlus
TESREG - Fusion 360 Hardware Benchmark
Facebook | YouTube
Solved! Go to Solution.
Solved by NicolasXu. Go to Solution.
Now that you mention it I noticed something similar to this yesterday, but I was in a huge hurry and didn't have time to look into it.
So I'm glad you posted it.
Phil Procario Jr.
Owner, Laser & CNC Creations
Ben Korez
Owner, TESREG.com & Fusion 360 NewbiesPlus
TESREG - Fusion 360 Hardware Benchmark
Facebook | YouTube
Yep it's repeatable with your file. I even tried different display modes, same thing....
Phil Procario Jr.
Owner, Laser & CNC Creations
Ben Korez
Owner, TESREG.com & Fusion 360 NewbiesPlus
TESREG - Fusion 360 Hardware Benchmark
Facebook | YouTube
Good catch, Ben!
It appears that the preview is confused by the component position. I have reported it to the development team for investigation (The ID is FUS-28127 for tracking purpose). It looks bad, fortunately, the final result is correct after clicking OK.
Hope it can be fixed soon. Thanks again for letting us know the issue.
Best Regards,
Ben Korez
Owner, TESREG.com & Fusion 360 NewbiesPlus
TESREG - Fusion 360 Hardware Benchmark
Facebook | YouTube
Good news! This is being fixed in the up-coming Jan update!