Community
Fusion Manufacture
Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Unable to deselect profile

19 REPLIES 19
Reply
Message 1 of 20
friesendrywall
711 Views, 19 Replies

Unable to deselect profile

Any ideas what to do here?

 

I submitted this to support, but haven't heard back.  This is really crippling to operations.

 

 

19 REPLIES 19
Message 2 of 20

I've been having this problem as well, glad to see it's not just me. Did they give you a case number or anything? I assume you went through the support.fusion360@autodesk.com email?

 

@paul.clauss or @innovatenate, is this anything you can look into and see if more examples or information is needed?


Seth Madore
Owner, Liberty Machine, Inc.
Good. Fast. Cheap. Pick two.
Message 3 of 20

They haven't replied.

 

I am trying to up the heat a bit.  This ought to be fixed fairly soon it seems.

 

while(1){

   DoMoreTesting();

}

Message 4 of 20
Steinwerks
in reply to: friesendrywall

I have found the best workaround is to us the Alt+selection for your first section in the chain and then edit that open contour.

 

Edit: @jeff.pek any news or information on this one? It's pretty easily repeatable.

Neal Stein



New to Fusion 360 CAM? Click here for an introduction to 2D Milling, here for 2D Turning.

Find me on:
Instagram and YouTube
Message 5 of 20
macmanpb
in reply to: friesendrywall

Here too!

 

iMac 27" Sierra 10.12.3 (16D32)

Message 6 of 20
porsbym
in reply to: friesendrywall

Thanks for reporting this. It is indeed a regression that unfortunately slipped through our testing.

 

We have logged the problem as ticket CAM-6813.

 

We have also fixed the issue and will push the fix into the next possible Fusion update.

 

/Mark

Message 7 of 20
Steinwerks
in reply to: friesendrywall

Thanks Mark!
Neal Stein



New to Fusion 360 CAM? Click here for an introduction to 2D Milling, here for 2D Turning.

Find me on:
Instagram and YouTube
Message 8 of 20
LibertyMachine
in reply to: Steinwerks

@porsbym Yeah, what he said ^^^


Seth Madore
Owner, Liberty Machine, Inc.
Good. Fast. Cheap. Pick two.
Message 9 of 20
porsbym
in reply to: LibertyMachine

You are all quite welcome. And many apologies for this issue.

 

/Mark

Message 10 of 20
macmanpb
in reply to: porsbym

Thank's to the team, Mark!

 

Message 11 of 20
friesendrywall
in reply to: macmanpb

@Acc_Manager If there was a basic version system, like beta, stable, bleeding, feeble, etc, I could go to my Preferences, click Feeble, and have a working tool until the next release.

Message 12 of 20
jeff.pek
in reply to: friesendrywall

I agree, that would be great. We're working with the delivery folks to try to establish something along those lines. Will take time, of course...

  Jeff

Message 13 of 20

You have a working tool. ALT+select.

Just because it's not how your accustomed to doing it doesn't mean it's not valid.


Seth Madore
Owner, Liberty Machine, Inc.
Good. Fast. Cheap. Pick two.
Message 14 of 20

I am using it, it is an appreciated point right now.

Message 15 of 20

I actually like it, I didn't know about it previously.

Message 16 of 20
Steinwerks
in reply to: friesendrywall


@friesendrywall wrote:

I actually like it, I didn't know about it previously.


It's certainly one of those hidden gems.

 

Honestly I use Alt+select just to start some chains because it begins as an open chain instead of having to change the selection type in the popup menu. Saves a click and my left hand is always on the keyboard anyway (no 3D mouse here Smiley Sad ).

Neal Stein



New to Fusion 360 CAM? Click here for an introduction to 2D Milling, here for 2D Turning.

Find me on:
Instagram and YouTube
Message 17 of 20
ndevenish
in reply to: Steinwerks

Thanks Steinworks - I had no idea you could hold Alt to select partial contours - this bug had seriously affected my ability to make 2D contour paths properly...

Message 18 of 20
keqingsong
in reply to: macmanpb

This will be fixed in our April 12 update! 


Keqing Song
Autodesk Fusion Community Manager
Portland, Oregon, USA

Become an Autodesk Fusion Insider



Message 19 of 20

still encountering the same issue

Message 20 of 20
porsbym
in reply to: ilgaz.karaaslan

Hi @ilgaz.karaaslan I just checked in the latest Fusion, and I'm not seeing a problem.

 

Maybe you have encountered a different problem, or a problem that's related to a specific part or type of geometry.

 

To help we need a bit more information and preferably an example file or screen recording.

 

/Mark

 

Oh, and maybe post to a new thread. This one is three years old, and it doesn't look like it is the same problem 🙂

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report