- Subscribe
- Mark as read
- Mark as new
Tips & Tricks are too blasé for me. That is why I do Hints & Hacks. We work in Revit and get used to the settings we use daily. How about that list under Additional Settings? Do you know how to set your arrows for dimensions, tags, and notes?
Have you ever needed to create a new linetype? Where would you go to find all the Drafting Fill Patterns? Let’s do a run through these Additional Settings for fun.”Revit Hints & Hacks:
What are those Additional Settings?
Event Recording
- Thursday, December 08, 2022
- 08:00 AM PST
- English (US)
- https://autodesk.zoom.us/meeting/register/tJMrfu-pqDIrEt0ZxJ-JLYf7ehPQwX_esqRL
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
We start in less than 30 minutes. Get ready!
Donnia Tabor
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
CADMama and Revit Family Counselor
Twitter @DonniaTH
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
Just a little more info on how we use Assembly Codes here in Holland after the bit I explained during the session.
We have a system called SfB-code, which was first made by some Swedish committee back in 1947 and was adjusted for the Dutch market in 1990 and I assume more European countries use something similar. What this does is give every object in a building a 4 digit code ##.##.
The first 2 tell you something about what object it is. For example 21 is interior walls, 22 is exterior walls, 31 is exterior wall openings (doors and windows), 44 are stairs and so on.
The second 2 numbers tell you more about what type of object it is. In the case of interior walls we have
.10 for general none structural walls
.11 for none structural solid walls
.12 for none structural multi layer walls
.13 for none structural fixed panel walls
.14 for none structural movable panel walls
etc.
So you will have 21.11 as the Assembly Code for an interior none structural solid wall
These numbers were already used in AutoCAD as part of the name of a layer and it helps in Revit (or Navisworks or Solibi) to quickly filter out objects.
Long list of each code can be found here:
http://www.modelleerafspraken.nl/index.php/bijlagen/bijlage-nl-sfb-4-cijfers
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
Fantastic Robin! Thanks for filling us in the US in on this. I am so glad I asked about if anyone in the group had used this so that we became enlightened during the session.
Love it!
Donnia Tabor
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
CADMama and Revit Family Counselor
Twitter @DonniaTH
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
Go get you some pyRevit!
https://github.com/eirannejad/pyRevit/releases
Donnia Tabor
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
CADMama and Revit Family Counselor
Twitter @DonniaTH
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
https://www.youtube.com/watch?v=H7b8hjHbauE
Here is a video on how to use pyRevit to create a Revit hatch pattern.
Donnia Tabor
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
CADMama and Revit Family Counselor
Twitter @DonniaTH