updating surface of a corridor

Anonymous · ‎11-15-2016

I have created alignments, profiles and corridors on a surface and after completing the drawing I have to change the entire surface and created a new surface. Is there any possibility to use the previously generated alignments, profiles and corridors for the new surface without re-doing the entire process and how it can be done?

Joe-Bouza · ‎11-15-2016

Ill make some assumptions:

You changed the corridor target surface by making a new target surface?

edit the corridor and change the target surface

Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

Jeew-m · ‎11-15-2016

Hi,

You can create the new surface with different name and add it to the corridor targets and as surface profile for your alignment.

Thanks.

Jeewana Meegahage
Design Engineer
Autodesk Civil 3D Tutorials
Facebook | YouTube | LinkedIn

neilyj666 · ‎11-17-2016

You could try pasting the new surface into the original surface and edit the Surface definition so that the pasted surface was only considered.

neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

AEC Collection 2025 UKIE (mainly Civil 3D UKIE and IW)
Win 11 Pro x64, 1Tb Primary SSD, 1Tb Secondary SSD
64Gb RAM Intel(R) Xeon(R) W-11855M CPU @ 3.2GHz
NVIDIA RTX A5000 16Gb, Dual 27" Monitor, Dell Inspiron 7760