trimming intersected daylight in section and superimposed profile edit

[Anonymous]

hi everyone,,my issues i can divided into two :1- is that i am making two different road corridor and they are having two different horizontal aligment and  i want to one of them to be at same design profile level to the other so i make profile view and draw design profile  for both of them then i superimposed on of them to the other and start want to edit the superimposed to be exactly match the other design one but i cant ,,is there method to exactly match superimposed  to the other or is there other method in order when i take section it give me both of them at same level

2-second question when i make daylight for both of them they are intersected and i want to trim this intersections 

[Jeew-m]

Hi,

First part is not clear at all. Do you need both profile to be same. Try to create a corridor with a flat link between two alignments and get the surface profile as a solution.

For two you can do this.

Suppose your Existing ground surface (Daylight target surface) is EG.

Say you have two corridors named A and B for the two roads.

Say your corridor surface for each corridor is Sur. A and Sur. B.

Now you can do this.

Create a new surface called combined surface.

First paste EG in this new surface.

Then paste Sur. A it.

Now for corridor A use EG surface as daylight target.

Then for corridor B use Combined surface as daylight target.

Refer this video also.

https://www.youtube.com/watch?v=6dbcMTbj7-U&t=3s

Thanks