Subassembly and Multi Surface

[neam]

How to define a sub-assembly such as an attachment to produce a corridor in two different surfaces?
Thank you for your guidance.

[Mike.M.Carlson]

Hello,

Try this out of the box subassembly:

Autodesk Civil 3D Help: DaylightMultipleSurface
https://help.autodesk.com/view/CIV3D/2020/ENU/index.html?guid=GUID-153AE7DD-0A8F-49ED-804B-AF9C82DA0...

If you need something more custom, you can use Subassembly Composer to tailor it to your needs.  This helpful video will help you get started.

[neam]

Hi Mike:

Thanks for your explanation.
I'm familiar with what you said about the subassembly.
But in this type of subassembly can only be done bench in a place where the surface changes.
And unfortunately I am not very professional in subassembly composer.

[M_Obradovic]

Hi neam

I create one simple Subassemby in SAC according your shetch. Please see attached PKT file (just rename ZIP to PKT when download) and check if will solve problem.

Regards 

[neam]

Hi Milos

Two points:
1. Left and right side not clear ??
2. The target surfaces is not clear ??

[M_Obradovic]

Hi, 

What version of Civil you use?

Can you open pkt file in SAC and save as with different name. Than try import again in C3D.

[neam]

Civil 3D 2019

[neam]

I open pkt file in SAC and save as with different name. and import in C3D 2019 but no change any thing

[neam]

in SAC every things is ok.

[M_Obradovic]

Hi 

Here is the same pkt file just renamed in SAC 2019. 

I hope now should work. 

[neam]

Thanks you very very much milos.

Fortunately, it works well.

Only can the number of benches on the sides be variable?
Now puts two benches on the right and left side.
Because the depth of excavation varies in different sections.

[M_Obradovic]

I add 3 bench more. If you need more benches tell me but I hope it is enought.

[M_Obradovic · Accepted solution]

here is PKT 

[neam]

I agree with you

It seems to be enough

Thank you again

[neam]

Hi Milos

Is it possible to draw a feature line between sections during the production of the corridor?

[M_Obradovic]

Hi

Yes it is posible, you just need to create point code for point which you want to create feature line. 

[neam]

In civil 3d corridor property or SAC???

[M_Obradovic]

In SAC. If you have same skethc with name of feature line post and I will create codes in SAC.

[neam]

Hi milos and thanks for attention 

The same previous project,

Including bench in bench out and daylight 

[M_Obradovic]

I hope that is ok but please check codes.  And don't forget to import codes in CodeSetStyle in order to can create feature line in C3D.