Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

Stage storage elevation table - contour elevation shown are constant multiples of actual elevation.

Anonymous

Stage storage elevation table - contour elevation shown are constant multiples of actual elevation.

Anonymous
Not applicable

I have been working in a detention basin design project for which i need the stage storage table. My contour lies between 46 and 68 ft. However, when I use the stage storage function, the contour elevations it gives are multiple of 15 the actual one. For example: 46 is shown as 690, 47 as 715 and so on. and the incremental depth is 15 ft instead of 1ft. I have checked the contours and surface properties, all are showing the contour interval as 1ft and lying between 46 and 68 ft. What causes this and how can I solve this?

0 Likes
Reply
379 Views
7 Replies
Replies (7)

pperales2
Advocate
Advocate

Are you using grading tools or feature lines to create the detention pond?

0 Likes

LucasHicks
Collaborator
Collaborator

I got it to work, Civil3d 2022.1.1, what version are you on.

 

Screenshot 2021-12-29 094349.png

OpenRoads Designer, Civil 3D
0 Likes

ChicagoLooper
Mentor
Mentor

Arcola, correct?

 

Is your basin named pond p? Did you make a copy and plop it down on Watts Plantation west of Knight?

 

You can manually enter the contour elevations. For example, from 46 to 68.

 

101.jpg102.jpg

 

Chicagolooper

EESignature

0 Likes

Anonymous
Not applicable

yes i used feature lines to define breaklines for the pond

0 Likes

Anonymous
Not applicable

I am on 2019..it works for mine too on pond r.. but for surfaces final pg and pond p it does not work

0 Likes

Anonymous
Not applicable

Thanks for the solution...I'll use this
But for other surfaces, I don't need to enter this data manually. Do you have any idea on what causes this?

0 Likes

Anonymous
Not applicable

Thanks for the solution...I'll use this
But for other surfaces, I don't need to enter this data manually. Do you have any idea on what causes this?

0 Likes