Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

profile link at intersection

4 REPLIES 4
SOLVED
Reply
Message 1 of 5
CADmgrMike
1004 Views, 4 Replies

profile link at intersection

I used the corridor intersection wizard to link two intersecting profiles together at the intersection point.

(I haven't created the intersection with assemblies yet. (A different learning session)

One of my alignments changed so now PI of the profile is not at the intersection point, but it's locked.

Is there a way to change the station of the PI?

Or do I need to delete my intersection and start over?

Not a big deal, but would be nice if I could just move the PI.

Mike Porter
https://provostandpritchard.com/
4 REPLIES 4
Message 2 of 5
Joe-Bouza
in reply to: CADmgrMike

Move the secondary alignment to intersect again

Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 3 of 5
CADmgrMike
in reply to: Joe-Bouza

the alignments still intersect.

It's just that one alignment got longer at the beginning so know the station point where the two profiles intersect is different.

Ex:

Before: profiles intersected at Sta 10+00 on one alignment and Sta 14+00 on the other

After: profiles intersect at Sta 10+00 and Sta 14+10

the locked PI of the one profile is still at Sta 14+00 and I'm trying to figure out if I can move it to Sta 14+10.

Mike Porter
https://provostandpritchard.com/
Message 4 of 5
Joe-Bouza
in reply to: CADmgrMike

Just delete an do over

Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 5 of 5
CADmgrMike
in reply to: Joe-Bouza

Kind of what I was thinking.
Mike Porter
https://provostandpritchard.com/

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report