Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pressure Network Sections

2 REPLIES 2
Reply
Message 1 of 3
ChristopherHinkley
204 Views, 2 Replies

Pressure Network Sections

ChristopherHinkley
Advocate
Advocate

I am currently using Civil 3D 2015 and started getting this message yesterday (see attached image).  It happens when I make minor changes, save the file and proceed to exit out of Civil 3D.

 

If anyone has any advice on the issue I would greatly appreciate at it.


Thanks for your time

Chris H

 

 

0 Likes

Pressure Network Sections

I am currently using Civil 3D 2015 and started getting this message yesterday (see attached image).  It happens when I make minor changes, save the file and proceed to exit out of Civil 3D.

 

If anyone has any advice on the issue I would greatly appreciate at it.


Thanks for your time

Chris H

 

 

2 REPLIES 2
Message 2 of 3
KirkWM
in reply to: ChristopherHinkley

KirkWM
Collaborator
Collaborator

I think this has to do with "round-tripping" between sort of "compatible" C3D generations (2013 to 2016 I think). Seems like something was originally created in an older version of C3D and may be opening up, or using a DREF, within a newer version.

0 Likes

I think this has to do with "round-tripping" between sort of "compatible" C3D generations (2013 to 2016 I think). Seems like something was originally created in an older version of C3D and may be opening up, or using a DREF, within a newer version.

Message 3 of 3
ChristopherHinkley
in reply to: KirkWM

ChristopherHinkley
Advocate
Advocate
Thanks for taking the time to reply.


I have Civil 3D 2015 and Civil 3D 2017 on my machine. I have only opened the "BAS" file in Civil 3D 2015. I typically use two base files "SRV" (existing) and "BAS" (proposed).


However, I made a copy of the .dwg file and ran a test in Civil 3D 2017 and everything is working correctly.


Chris H
0 Likes

Thanks for taking the time to reply.


I have Civil 3D 2015 and Civil 3D 2017 on my machine. I have only opened the "BAS" file in Civil 3D 2015. I typically use two base files "SRV" (existing) and "BAS" (proposed).


However, I made a copy of the .dwg file and ran a test in Civil 3D 2017 and everything is working correctly.


Chris H

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report