HELLO .
I have tried to change the material on part data-pipe properties from reinforced concrete pipe to just sdp. I have gone to part builder and change the material from reinforced concrete pipe to sdp and save the part builder. however it will not save the drawing, partbuilder. that is when I go to main drawing and add the material to text component it will not add the material. I think my problem is bc the builder dwg is not saving my changes. im using civil3d 2017
thanks
Gelöst! Gehe zur Lösung
Gelöst von cwr-pae. Gehe zur Lösung
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Check the parts list. If anyone entered a material under the parts list it persists until changed in the parts list. The parts list effects parts when they are created not after. Existing parts will need to be swapped for new version of the same part for any changes to effect them.
In the settings tab of prospector find pipe networks, expand and pick parts list, right click the parts list name and select edit. select the part, right click and select edit. Near the bottom of the pop is materials. You can enter materials far parts there.
After part has right material in parts list, select a part in drawing area. Right click select swap part and pick the part name. This will update the part in the drawing to match the part and settings the parts list
If you don't see the new material listed in the parts list: Did you click catalog regen in part builder after you made the changes to the part? Did you use the refresh option for the part in the parts builder list?
If you see the material in the parts list: Did you swap the part in the drawing for a new part? and try swapping to a different part and then swapping back if just swapping for the same part doesn't correct the material.
Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.