Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
One of our subconsultants sent me a cad file and a PDF copy of the drawings as a reference. In the PDF the vicinity map on the first sheet has the right orientation but in the cad file, the vicinity map appears to be mirrored/reversed with all text backwards. Do you have any suggestions on fixing this problem? I'm using Civil 3D 2009 with service pack Version 3.1. Thanks
One of our subconsultants sent me a cad file and a PDF copy of the drawings as a reference. In the PDF the vicinity map on the first sheet has the right orientation but in the cad file, the vicinity map appears to be mirrored/reversed with all text backwards. Do you have any suggestions on fixing this problem? I'm using Civil 3D 2009 with service pack Version 3.1. Thanks
Have you tried to mirror the TIFF image? Turn Tframes to OFF and mirror the image about a point. If the image is on a coordinate system, I would draw 2 lines, from one corner of the TIIF to the opposite corner, and mirror about the intersection of both lines.
Edited by: civman_bloom on Mar 30, 2010 2:42 PM
Have you tried to mirror the TIFF image? Turn Tframes to OFF and mirror the image about a point. If the image is on a coordinate system, I would draw 2 lines, from one corner of the TIIF to the opposite corner, and mirror about the intersection of both lines.
Edited by: civman_bloom on Mar 30, 2010 2:42 PM
