Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Manually setting HGL Hydraflow

6 REPLIES 6
SOLVED
Reply
Message 1 of 7
Anonymous
2387 Views, 6 Replies

Manually setting HGL Hydraflow

I've used Hydraflow many times before, and was allowed to manually set the starting HGL to match the peak pond stage for the pond that the conveyance discharged to.  Now, however, I can't get the model to accept a manually entered starting HGL.  It lets me enter a number in the dialog box, but always lowers it back down to one of the other options, (crown, critical, etc.), when running.  Am I doing something wrong?  I know it will reset if you try to use too low a starting HGL, but I'm trying to set it up high to model the expected tailwater.

 

Any help is tremendously appreciated, even if just to point out something stupid I've done!  Current version is whatever comes with C3D 2016.

Tags (2)
6 REPLIES 6
Message 2 of 7
Anonymous
in reply to: Anonymous

I just ran the program from a different machine, one that hadn't been updated for several weeks, and it allowed me to adjust the HGL as expected.  The other computer is running C3D 2016 as well, I just hadn't gotten around to applying the updates to it for a while.  Interestingly, the version of Hydraflow reported in each is 10.5.

Message 3 of 7
tony1978
in reply to: Anonymous

I just created a simple storm system in 2016 and set the HGL elevation and it worked fine. Maybe try a repair. Can you post an image of hte Compute System dialog box?

 Tony Carcamo


President/Owner


Civil CAD Learning Solutions


DFW BIM Infrastructure User Group


LinkedIn | Twitter | Instagram | DFWBIUG |User Group




Message 4 of 7
Anonymous
in reply to: tony1978

Thanks for the response.  I've got it to run.  I don't understand why, but if I set the HGL manually, I must use a decimal point in order for it to "take".  In other words, if I just entered 146 into the dialog box, the program reset it to crown, or critical, or one of the other, last-used pre-set values.  If, however, I set the HGL to 146.00, it accepted it.   I hate that it took me so long to figure that out.

Tags (1)
Message 5 of 7
Hidden_Brain
in reply to: Anonymous

Thanks for posting the solution.
Message 6 of 7
Anonymous
in reply to: Anonymous

Thank you so much for posting this solution.  This has been driving me insane lately and it was as simple as adding a decimal point.

Message 7 of 7
MAYOWANFC52
in reply to: Anonymous

This is wild! Thanks for posting this solution. I would never have guessed that.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report