Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Label the hatch of the surface while elevations display is on

1 REPLY 1
Reply
Message 1 of 2
nkiakas
123 Views, 1 Reply

Label the hatch of the surface while elevations display is on

Hello

 

Is there any possibility to label the hatch from the elevations for the surface?

For example, to show the area on the surface, volume (for cut/fill surface), or the max/min elevation...

The above could be shown in the surface table, but I am interested to show this information on the surface.

 

Thank you

Tags (2)
Labels (2)
1 REPLY 1
Message 2 of 2
michal.holda.
in reply to: nkiakas

Hello @nkiakas , 

 

Below you can find a guidance on what type of labels can be applied for the Civil 3D surface and how to add them. 

 

https://knowledge.autodesk.com/support/civil-3d/learn-explore/caas/CloudHelp/cloudhelp/2023/ENU/Civi....

 

Hope this helps.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


 

Autodesk Design & Make Report