Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

Hydraflow Storm Sewers Extension / Multiple Outfalls

ericheckman08
Enthusiast

Hydraflow Storm Sewers Extension / Multiple Outfalls

ericheckman08
Enthusiast
Enthusiast

I drew my network in sections and merged them all together and made sure they were all connected. Ran my network in Hydraflow but its giving me three (3) outfalls in when I only want one. What would cause this and how could I fix this? I've attached and image for reference. The only outfall I want is the one at the very bottom attached to pipe 1.

 

hydraflow.JPG

0 Likes
Reply
3,458 Views
3 Replies
Replies (3)

Anonymous
Not applicable

I am having the same exact problem with Hydraflow Storm Sewers extension. I have changed the part 5 times and reexported the information to Storm sewers. The most upstream drainage inlet is still reading as an outfall. How to do change this to a regular storm drainage inlet IN storm sewers??

0 Likes

Anonymous
Not applicable

I FIGURED OUT THE ISSUE. IF YOU HAVE A PIPE NETWORK IN AUTOCAD CIVIL 3D, THERE ARE SETTINGS FOR ALL PIPES AND STRUCTURES. YOU CAN VIEW THESE SETTINGS IN YOUR PROSPECTOR. SO YOU HAVE TO RIGHT CLICK THE PIPE, CLICK PIPE PROPERTIES, SEE THE SETTING THAT SAYS "PIPE FLOW DIRECTION METHOD" CHANGE THE PIPE FLOW TO "START TO END", THEN REEXPORT TO STORM SEWERS. THIS WORKED FOR ME AND IT REMOVED THE UNWANTED OUTFALL NODE IN STORM SEWERS. 

Anonymous
Not applicable

Dear Arthur,

 

Idk who you are. But I can tell you what you have done today. I have been facing this problem for the last 6 hours and you have delivered tranquility to me. I am no longer afraid of anything in this world knowing that you exist somewhere out there. I hope to one day follow in your footsteps. It is weird for me to say this, but I love you Arthur.

 

XOXO

-Student who procrastinated his final project

Type a product name