Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Hydraflow Storm Sewers acting VERY Strange

0 REPLIES 0
Reply
Message 1 of 1
abanfield
122 Views, 0 Replies

Hydraflow Storm Sewers acting VERY Strange

abanfield
Community Visitor
Community Visitor

Hello,

Kind of a strange thing I just discovered after doing about 50 hours of system modeling. If I'm in a network and I hit Run to get my Results and then hit Run AGAIN using the same parameters, the Results CHANGE.  I made no changes to the network, just back to back runs. 

 

Wondering if it is the Loss Method I'm using. I went with Cummulative, but I see it is doing the same thing for Automatic and Manual.

 

I'm trying to post a video I made showing what is happening. My apologies for the deafening DING after each execution!

 

Anyone run in to this before?  Any help is greatly appreciated.

0 Likes

Hydraflow Storm Sewers acting VERY Strange

Hello,

Kind of a strange thing I just discovered after doing about 50 hours of system modeling. If I'm in a network and I hit Run to get my Results and then hit Run AGAIN using the same parameters, the Results CHANGE.  I made no changes to the network, just back to back runs. 

 

Wondering if it is the Loss Method I'm using. I went with Cummulative, but I see it is doing the same thing for Automatic and Manual.

 

I'm trying to post a video I made showing what is happening. My apologies for the deafening DING after each execution!

 

Anyone run in to this before?  Any help is greatly appreciated.

Labels (1)
0 REPLIES 0

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report