Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

How to Project Only the Crossed Portion of a Solid in Civil 3D Cross-Sections?

3 ANTWORTEN 3
Antworten
Nachricht 1 von 4
raja.khanCNTNX
94 Aufrufe, 3 Antworten

How to Project Only the Crossed Portion of a Solid in Civil 3D Cross-Sections?

I am facing an issue in Civil 3D. When I project a solid into a cross-section, the entire solid gets projected into the section. However, I only want the portion of the solid where the sample line crosses to be projected.

Could someone guide me on how to achieve this?

Beschriftungen (1)
3 ANTWORTEN 3
Nachricht 2 von 4
nkiakas
als Antwort auf: raja.khanCNTNX

Hi @raja.khanCNTNX 

 

Could you share your file with your solid to take a look?

 

Regards

Nachricht 3 von 4
cwitzel5NL5H
als Antwort auf: nkiakas

I think you just need to enable Section in the Projection Style under Profile.

cwitzel5NL5H_0-1735571565605.png

Thanks,

Conan Witzel
Herrera Inc
Nachricht 4 von 4
MSchille-1994
als Antwort auf: raja.khanCNTNX

Sliced Section or Slice in the Section Tab of style.

Attitude, not Aptitude, Determines Altitude

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Rail Community


Autodesk Design & Make Report