Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Corridor Issue with RetainWallVertical Subassembly

4 REPLIES 4
Reply
Message 1 of 5
matthew.andersonYXZ8M
311 Views, 4 Replies

Corridor Issue with RetainWallVertical Subassembly

Hi All,

I'm widening a road and need a retaining wall where I cut into the hillside (see plan view.png).  I am using OverlayWidenMatchSlope1 subassembly and a shoulder, which works great without any corridor error messages.  When I try to add the RetainWallVertical subassembly (see assembly.png), I keep getting error messages in my event viewer "Value on wrong side of alignment or profile..." (see attached event viewer.png).  The wall is "left" attached.  I wasn't able to find any solutions in the forums, so hoping someone can help.

Thanks,

Matt

4 REPLIES 4
Message 2 of 5

Can you post a screenshot of Assembly Properties, Construction tab?



Tim Corey
MicroCAD Training and Consulting, Inc.
Redding, CA
Autodesk Gold Reseller

New knowledge is the most valuable commodity on earth. -- Kurt Vonnegut
Message 3 of 5

Hi Tim, 

Thanks for taking a look at this.  See attached for assembly properties construction tab.

Message 4 of 5

Your retaining wall subassembly is listed as in the right group, but the screenshot of the assembly has it on the left.



Tim Corey
MicroCAD Training and Consulting, Inc.
Redding, CA
Autodesk Gold Reseller

New knowledge is the most valuable commodity on earth. -- Kurt Vonnegut
Message 5 of 5

I guess I am missing something big here.  OverlayWidenMatchSlope1 does not have a "side" parameter (can't mirror it or assign to the left side), so I assigned it a negative insert point offset, which shows it on the left side of the assembly.  Any suggestions for that?

Thanks,

Matt

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


 

Autodesk Design & Make Report