Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Corridor Issue with RetainWallVertical Subassembly
Corridor Issue with RetainWallVertical Subassembly
Hi All,
I'm widening a road and need a retaining wall where I cut into the hillside (see plan view.png). I am using OverlayWidenMatchSlope1 subassembly and a shoulder, which works great without any corridor error messages. When I try to add the RetainWallVertical subassembly (see assembly.png), I keep getting error messages in my event viewer "Value on wrong side of alignment or profile..." (see attached event viewer.png). The wall is "left" attached. I wasn't able to find any solutions in the forums, so hoping someone can help.
I guess I am missing something big here. OverlayWidenMatchSlope1 does not have a "side" parameter (can't mirror it or assign to the left side), so I assigned it a negative insert point offset, which shows it on the left side of the assembly. Any suggestions for that?
