Adding Stationing a Corridor

Anonymous · ‎02-28-2018

Hello,

I need to add stationing to a corridor. For some reason I cannot. Is there a way to do this or do I need to use a alignment. This is for my Engineering Capstone project, so please forgive my lack of knowledge on the subject. I've taught my self Civil 3D over the past couple days to get to this point.

I have a profile view with stationing but I cannot get it to appear on the newly created corridor. So far the corridor includes centerline, L&R edge line, along with a 3:1 side slope for the cross sections. Sorry for the info dump, but I am unsure what is needed to help me here.

KMercier_C3D · ‎02-28-2018

Stationing is on the alignment. You will want to select the alignment and Add Alignment labels.

Some of these might help you learn more: LINK

Kati Mercier, P.E. | LinkedIn | AutoCAD Civil 3D Certified Professional
Pronouns: She/Her
Co-author of "Mastering AutoCAD Civil 3D 2013"
AU2019 Speaker::: CES321590: Analyze and Revise Existing Subassembly Composer PKT Files for AutoCAD Civil 3D
AU2017 Speaker::: CI125544: Analyze and Devise in Subassembly Composer
AU2012 Speaker::: CI3001: Reverse Engineering with Subassembly Composer for AutoCAD Civil 3D
AU2011 Speaker::: CI4252: Create Subassemblies That Think Outside the Box With Subassembly Composer for AutoCAD® Civil 3D®

Community

Adding Stationing a Corridor

Adding Stationing a Corridor

Adding Stationing a Corridor