1st label is not displaying in civil 3d profile view

[vinayak_bandi]

hi,

PFA.....

1st label is not displaying in civil 3d profile view profile bands

i have highlighted in red colour

plz guide 

Thanks

[BrianHailey]

Are you sure your profile begins at that station? If it's off, even by some microscopic amount, it won't display there. And looking at a label or readout of the station isn't always enough. For example, if that station is 1+00 and when you look at the station for that first PVI it says 1+00, that doesn't mean that's the actual station. It could be at station 1+00.000001. All displays will round to 1+00 but since there is no profile at 1+00, then there won't be a label there.

[cwr-pae · Accepted solution]

Two things come to mind. 1) Check the Profile View Properties, "Bands" tab and verify "Label Start Station" is on for that band. 2) Right click on the band label to the right of the one missing and look for "Reset All Group Labels" and select.

[vinayak_bandi]

Thanks for guidance