Placing drain valves on pipe

[andreas_kabergM8F2C]

I want to place a DN15 drain valve with welded ends directly on to a DN150 pipe. Is that possible?
No I don't want a stub in pipe from the DN150 pipe. On the isometric drawing I want the drain valve directly welded to the DN150 pipe. Basicly i don't want the stub in pipe to show up in the Bill Of Materials and Cut Piece List on the isometric drawing.

[h_eger]

@andreas_kabergM8F2C ,

technically, this can be done.
In practice, it is not possible to use an inline object as an endline object in Plant 3D.
So you will not be spared the pipe section.
For technical reasons, a reinforcement ring must be installed for the DN 150 variant with a DN15 outlet.

[jabowabo]

This thread may be helpful: https://forums.autodesk.com/t5/autocad-plant-3d-forum/valvolet/td-p/11617459

[h_eger]

@jabowabo ,

yes Jason it works as a nipple but not as an inline valve 😁