Pipe support elevation/dimension not showing up in isometric

[roystercabral]

Hi All,

I have created a custom pipe support clip (bolted) on the pipe and also a 3D model of the adjacent clip on the vessel.

When i generate ISO for this line, the support is shown on the isometric but the location and orientation is not shown, the pipe clip is rotated by 11 degree so the orientation is very much necessary to be shown.

Hoe do i accomplish this ?

Regards

Roy

[h_eger]

Hi @roystercabral,

are the Supports as "Existing" status in Plant 3D?
Set it to state NEW should work.

[roystercabral]

The status is already NEW. 

[h_eger]

Hi @roystercabral,

which project configuration do you have: Imperial mm or Metric mm or MixedMetric mm?

Can you upload the PCF file this iso?

[roystercabral]

Hi Eger,

I use mixedmetric.

sorry not allowed to upload files.

Thanks.

[h_eger]

Hi @roystercabral,

this is my result of isometric.