Announcements
Autodesk Community will be read-only between April 26 and April 27 as we complete essential maintenance. We will remove this banner once completed. Thanks for your understanding
Announcements
We are currently migrating data within this board to improve the community. During this process, posting, replying, editing and other features are temporarily disabled. We sincerely apologize for any inconvenience caused and appreciate your understanding. Thank you for your patience and support.

P3D/ACC Production Iso Locked

daniel.escamillaBRIS
Contributor Contributor
166 Views
1 Reply
Message 1 of 2

P3D/ACC Production Iso Locked

daniel.escamillaBRIS
Contributor
Contributor
‎03-12-2025 09:14 AM

Hi everyone I'm having this issue when creating a production isometric and opening from the "Isometric Creation Results" pop up it will lock up the drawing. Its not a big deal I can just go to the isometrics tab in the project manager and look for it and check it out. Its just a bit annoying.

 

Any idea why its doing this? 

 

Thanks!!

Reply
Reply
Report
0 Likes
Accepted solutions (1)
Solution 1
167 Views
1 Reply
Tags
Reply (1)
Message 2 of 2

h_eger
Mentor
Mentor
‎03-12-2025 10:12 AM
Accepted solution

@daniel.escamillaBRIS ,

 

the iso is opened read-only in the ACC project from the pop-up window because it is not checked out with the link.

-

If my reply was helpful, please give a "Kudo" or click the "Accept as Solution" button below (or both).

Hartmut Eger
Senior Engineer
Anlagenplanung + Elektotechnik
XING | LinkedIn

EESignature



Reply
Reply
Report
Report a website issue