Missing weld numbering in isometric drawing

[cristian_miler]

Hello,

Whenever i create an isometric drawing from my 3D model, welds appear in the table but the numbering on the drawing is missing. I am using Plant3D 2024.

I have already searched for a solution on the forums (like this one: https://forums.autodesk.com/t5/autocad-plant-3d-forum/plant-3d-2016-isometric-weld-list-shown-but-we...) and I created a few isostyles and modified the .xml file to display all welds (field and shop) but nothing works.

I noticed that in the sample project, isometric drawings have the numbering displayed but when i import my piping into the sample project and extract the isos, the weld numbering is missing.

I am using a custom spec/catalogue built from scratch with socketweld FTG/C connections (it seemed similar to brazed copper connections) and a custom nominal diameter map file.

Does anyone know what causes this issue?

I attached some .pcf files, the spec, the isostyles and the nominal diameter map.

Thanks!

[h_eger]

Dear @cristian_miler ,

Sorry, I'm out!
This is a service order and not forum help!
I can't solve this problem in 15 minutes, there's too much going on.

[cristian_miler · Accepted solution]

I received help from Autodesk.

In case anyone encounters the same problem, in project setup, for each isostyle (or just the one you're using), you have to edit these 3 fields like this:

In XML editor Filters -> Filter (Weld) -> Replace  Type LIKE '*Weld'  with Type LIKE '*Weld' OR Type = 'Solder'

-> (WeldFieldItem) : Type LIKE '*Weld' OR Type = 'Solder' AND (Category='ERECTION-ITEM' OR Category='OFFSHORE-ITEM')

-> (WeldShopItem) : Type LIKE '*Weld' OR Type = 'Solder' AND Category='FABRICATION-ITEM'

Note: I think everything is case sensitive. Write the text like above and don't add more space between characters.

In my case, i used solder connections, you can find yours by checking the connector properties:

I attached my updated isoconfig.xml file for reference.