Metric unit for bolts in BOM table

[bojan.caric]

Hello Community.

I have an issue regarding the bolt unit presentation on BOM table. I am working in Plant 3D 2023 version.

My Project setup is set to Mixed-metric unit and even though I have made the bolt sets from DIN EN Pipes and Fittings Catalogue, when I generate the ISO drawings, size for my bolts is presented as nominal diameter in inches x length, i.e. 3/4''x90 (please refer to the Attachment 1). 

Is there any way to switch this to metric units, i.e. can I have representation for my bolt set only in metric units (for example M20x90)?

Every help would be highly appreciated.

[DVaquand · Accepted solution]

Hello

You have a good tutorial here

https://www.manandmachine.co.uk/display-metric-bolt-sizes-in-mixed-metric-plant-3d-project-isometric...

== French ==

Vous avez un bon tuto ici

https://www.manandmachine.co.uk/display-metric-bolt-sizes-in-mixed-metric-plant-3d-project-isometric...

Cordialement
Dominique VAQUAND
www.dovaq.fr

Si mon message propose une solution, veuillez cliquer sur "Accepter comme solution"
If my post offers a solution, please click "Accept as Solution"